Nuclear power as a low energy, efficient, clean resources. It has already risen to the national strategic level, is facing unprecedented development opportunities, but also ushered in the spring of rapid development of nuclear power facilities. With the continuous progress of nuclear power technology, the anti-corrosion safety of nuclear power facilities has also been promoted to an unprecedented height. Through the cooperation with many nuclear power equipment manufacturers, Kaimeng has accumulated rich experience in surface anticorrosion treatment of nuclear power facilities, and has rich experience in surface anticorrosion treatment of nuclear power radiating equipment and nuclear power fuel rod storage equipment.

Rapid removal of oxide skin, on the surface of the silvery white matte bright protective layer

Considering the safety and time durability, all nuclear power facilities often choose materials with good corrosion resistance of 316 and 316L or above. Due to welding and grinding, these materials will inevitably produce high temperature oxide scale and mechanical damage, resulting in surface defects of the workpiece. Due to the high corrosion resistance, high safety and other reliability indicators of nuclear power parts, these safety hazards must be eliminated before the parts are formally put into use, so as to ensure the safety and reliability of the parts and meet the requirements of use.

With more than 12 years of experience in nuclear power facility treatment, CAEMON can provide reliable treatment solutions for nuclear fuel rods, nuclear power plant carts, nuclear reactor facilities and corresponding pipelines, and has signed a 40-year cooperation intention agreement with a well-known nuclear power facility supplier in China. Through the company's technical treatment can effectively remove the oxide scale attached to the workpiece surface and repair the defects caused by mechanical damage, and form a passivation antirust film with excellent corrosion resistance, the relevant tests meet the relevant standards of the industry.

Provide simple surface treatment solutions for large parts in operation

Some large nuclear pressure vessel, has set up a good outdoor nuclear power piping if you want to achieve very good anti-rust effect, meet the needs of facilities operation, surface treatment is a challenge to be reckoned with, how can you under the condition of the installed convenient and effective to deal with it, this is the common dilemma faced by nuclear power industry.

For the problems existing in the above industries, Kaimeng has rich experience in on-site technical guidance and construction, and can provide convenient and environmentally friendly solutions to customers through the corresponding auxiliary facilities, and finally meet the needs of customers' relevant standards.

Reduce the scaling of the cooling line

After years of contact with the nuclear power industry, it is found that during the operation of facilities, especially the cooling related stainless steel pipes and containers, after a period of operation, no matter what the water quality is, there will inevitably be some scale on the inner surface of the pipes and containers. The existence of scale will not only affect the efficiency of operation, but also bring some unpredictable risks.

According to the above problem, kay after a great deal of on-the-spot experiments, puts forward using electrochemical way on the inner surface of the parts from a predominantly chromium oxide film layer, such as the membrane layer is the potential potential, and processing the inner surface roughness after than before treatment significantly reduce, therefore, through such processing, it is proved in operation in the scale of risk will get great improvement. The biggest challenge of this technology is how to overcome the electrochemical treatment of the inner wall of the abnormal pipe. To overcome this problem, Kaimon has proposed a new use of the solution and has applied for a patent.